Airthings Resources - Articles, Research & News on Air Quality - Get it Here! (2024)

Learn how to tackle excess moisture and dry air, which can both cause damage to different parts of your property.

Introduction

When humidity in your home is too high or too low, it can make living conditions unpleasant, and it can also do lasting damage to the property.

High humidity creates excess moisture and condensation that potentially leads to mold or rot, while low humidity has been linked to the rapid spread of viruses like cold, flu, and even Covid-19.

In this article, we’ll discuss how bad humidity can cause damage to your physical property, fixtures, and fittings. We’ll cover how to tackle existing problems. and how to make sure the conditions are right in your home to prevent future damage.

What is humidity?

Humidity is simply the concentration of water vapor present in the air, while relative humidity measures the amount of water in the wait in relation to the maximum amount of water vapor it can hold. For example, when outdoor humidity reaches 100%, the air cannot hold any more moisture and it starts to rain.

In warmer temperatures, the atmosphere can hold more water vapor so, typically, turning up the heating in a room will cause relative humidity to fall. However, there are many different factors that cause these values to vary.

Drying laundry, a boiling pot, or a hot bath are all likely to cause humidity levels to rise, while ventilating a room properly will cause levels to fall, even though it generally makes the air cooler.

Airthings Resources - Articles, Research & News on Air Quality - Get it Here! (1)

Research from the Building Science Corporation found that humidity of 70% or higher adjacent to a surface can cause serious damage to the property. The Health and Safety Executive recommends that relative humidity indoors should be maintained at 40-70%, while other experts recommend that the range should be 30-60%. Most people find 30-60% most comfortable and this is the level that Airthings recommends.

How high humidity causes damage in your home

High humidity can cause problems in your home if relative humidity regularly exceeds 60%. When the air contains water vapor above that level, mold and mildew start to grow, while excess moisture can cause rot, damaging your belongings. Let’s look at some potential problems.

Growth of mold and mildew

These microscopic fungi are all around us, but in damp parts of the home, they find the perfect conditions to settle on surfaces and grow. Mildew usually refers to the white or grey patches that form on surfaces like shower curtains, windowsills, or tiles, while mold is black or dark green in color and can penetrate deeper into building materials.

Mold can cause health problems, like asthma in children, as well as triggering allergies.

If mold growth is not controlled, it eventually destroys the things it lives on, because the fungus gradually digests materials. This might mean that items like soft furnishings, books, carpets, or soft toys have to be thrown away. In more serious cases, it causes weakened ceilings or walls, and undermines the structural integrity of buildings.

Damaged paintwork and peeling wallpaper

The walls of your home are a prime site for condensation to gather, if high humidity is not controlled. The issue is particularly acute with exterior walls, as it’s here that warm, humid air meets a cooler surface.

Flaky paint or curling wallpaper is a sign of excess moisture in the home. It’s important not to just paint or paper over the problem without dealing with the damp, because it won’t go away.

Rotting furniture, floors, and furnishings

Excess moisture in the home due to high humidity can damage wood, either by creating stains and growths, or eventually by causing more serious decay. When furniture is placed close to outside walls, there is a higher risk that damp will set in.

In the most serious cases, when a problem with excess moisture goes on for a long time, it can cause irreversible damage to hardwood floors, window-frames, and other wooden fittings.

Damaged walls and brickwork

The walls of your home will generally have air/vapor barriers, intended to prevent warm moist air penetrating the surface, but these are never perfect. Especially when the weather is warmer, moisture can condense in foundation materials, crawl spaces, and basem*nts, leading to problems with the structure.

When the moisture content in plaster, joists, or studs is constantly changing, it causes materials to swell or contract. As a result, high humidity can lead to cracks, which may call for potentially expensive repairs.

How to prevent high humidity in your home

The good news is that you can take some simple steps to deal with high humidity in your home, with the help of good quality information about the humidity levels in your property.

The things we all do in our houses every day: washing clothes, taking baths or showers, cooking, and even breathing, generate moisture, but we can limit humidity problems in the home by minimizing this moisture and letting it escape.

Firstly, take steps to ensure that water can’t get into your home, by checking your roof and brickwork regularly, particularly after winter storms.

Make sure your property is properly ventilated. That could be as simple as cracking open a window, but make use of fans and air conditioning too. This is especially important in rooms like the kitchen, the laundry, and the bathroom. When you’re cooking, use the ventilation hood, and activate extractor fans in the bathroom or laundry.

Humidity causes fewer issues if your home remains properly and consistently heated. Try to maintain a relatively constant temperature, even if it means turning down the thermostat a little, but keeping the heating on for longer. As a result, there will be less opportunity for warm air to cool and cause condensation.

In addition, avoid drying clothes indoors, if you suffer from high humidity. Hanging wet towels or other items on radiators is a common practice that creates humidity as the moisture evaporates, increasing the risk of humidity damage in the home.

Finally, by installing indoor air quality monitors you will be alerted to any potential problems, and have historical data, so you can see where persistent issues arise. Humidity sensors are an essential part of any air quality monitor, as they provide a detailed understanding of potential issues regarding moisture in your home. Avoid problems and optimize conditions with minimum fuss.

How to fix high humidity in your home

So if you already know that you have high humidity problems in your home, what can you do about it? Many of the prevention measures are also effective in dealing with existing issues.

Ventilation is key, and the simplest remedy is often to open windows. A more lasting solution could involve installing air conditioning, to get air circulating through your home, which will carry the moisture away.Alternatively, a dehumidifier draws moisture from the atmosphere, causing humidity to drop.

If you don’t have effective extractor fans in bathrooms or laundry rooms, or the ventilation hoods in your kitchen aren’t working well, you may need to repair or replace this equipment. Make sure that washing machines and tumble driers are plumbed in properly, and vented so that moisture escapes as it should.

How low humidity damages your home

How low should you let humidity get in your home? As we’ve discussed previously, ideally the figure should not drop below 30%. At lower humidity levels, the effects can include dry or itchy eyes, dry skin, and infections spreading more rapidly.

Dry, low-humidity air also causes physical damage to the home. Wood contains a certain amount of water, in ideal conditions, and when it loses too much moisture in dry air it experiences shrinkage. This can result in serious damage to flooring and furniture, or shifting window panes. Low humidity can also generate excess static electricity, which sometimes affects electrical equipment and computers.

How to prevent low humidity in your home

To prevent low humidity in your home, you should find ways to add more moisture into the air. For example, you might want to leave a door open to let steam escape from the shower. Or you could choose to air-dry clothes indoors. You could turn down the heat or boil a pot of tea on the stove. Think about investing in some pot plants too as they release moisture into the air. All of these actions will increase the humidity in your home. But be careful you don’t overdo it, and end up with a problem of high humidity as a result.

How to solve low humidity in your home

If you have persistently dry air, you might want to consider installing air conditioning or a humidifier to get the conditions right. To make sure that you’re doing the right thing, and to avoid going too far and encouraging high humidity, it’s important to understand the air quality in your home.

An indoor air quality monitor will provide real-time and historical data on humidity, as well as other metrics, so you know exactly where problems exist and where they could potentially arise.

KEY TAKEAWAYS

  • High humidity over 60% can encourage mold and mildew, and damage furniture, wallpaper, paintwork, floors, and brickwork.
  • To help combat high humidity problems, heat your home properly, use ventilation, and keep moisture-creating activities to a minimum.
  • Low humidity causes wood to shrink, which can damage furniture, floors, and window panes. It can also affect electronics.
  • Heating and ventilation can help to control low humidity issues, while a humidifier stops the air from getting too dry.
  • Using an indoor air quality monitor gives you detailed data on humidity, so you can deal with issues and avoid damage to your property.
Airthings Resources - Articles, Research & News on Air Quality - Get it Here! (2024)

FAQs

What does AirThings detect? ›

Equipped with seven sensors, including Radon, Particulate Matter (PM1 & PM2. 5), Carbon Dioxide (CO2), Airborne Chemicals (VOCs), Temperature, Air Pressure, and Humidity. Empowers you to take control of your well-being: Sometimes even the thing you're born great at could use a boost.

Does AirThings detect smoke? ›

The Wave Plus and Wave Mini both contain VOC sensors which measure the total amount of airborne chemicals present, which would include the chemicals present in cigarette smoke. However, it is not capable of detecting whether cigarette smoke is specifically present.

How does AirThings measure CO2? ›

NDIR technology:

It measures the amount of CO2 gas molecules in the chamber, which samples air from the room it is placed in. A light shines on a sensor at the other end of the chamber. As the light passes through the chamber, only CO2 is absorbed.

Does Airthings really work? ›

Airthings's Professional devices, Plus and Pro, provide very high levels of accuracy. The Plus measures at just 12% accuracy after a week and 9% after a month, measured at 50-to-350 Bq/m3. The Pro boasts an impressive 7% accuracy after 24-hours and less-than-5% after a week.

What is the lifespan of Airthings? ›

Corentium Home by Airthings offers real time monitoring in as short as 24 hours after set-up. Display 1 day, 7 day and past history up to one year. Portable, re-usable and lendable with reporting capability. Powered by AAA batteries with an estimated 2 year life span.

Can Airthings detect mold? ›

How does the Airthings mold risk indicator work? The mold risk sensor uses an algorithm based on the temperature and humidity sensor to measure how fast mold can grow under the current conditions.

Is there a device that can detect air quality? ›

A low-cost air pollution monitor is a device that uses one or more than one sensor and other components to detect, monitor and report on specific air pollutants like particulate matter (PM) or carbon dioxide and/or environmental factors such as temperature and humidity.

How long does airthings wave work? ›

Wave Radon and Wave Plus come with 2x AA batteries and they are designed to have an expected battery life of approx. 1 year. The Wave Mini comes with 3x AA batteries and they typically have a lifetime of approx. 2-3 years.

Where should radon detectors be placed in Airthings? ›

(At least: 20 inches (50cm) above floor; 12 inches (30cm) below ceiling; 12 inches (30cm) from walls; 36 inches (90cm) from exterior doors, windows, or openings; and 4 inches (10cm) from other objects). Place at approximate breathing height.

Why is CO2 high in basem*nts? ›

During periods of falling barometric pressure, the pressure on the land surface (or basem*nt) will be reduced relative to that in the ground. Under these conditions, CO2 will flow from the ground into the basem*nt, resulting in the potential for higher concentrations of CO2 to migrate into buildings.

What humidity level for Airthings? ›

Things to consider

Airthings recommends healthy humidity levels between 30-60% as too high humidity can cause dampness and mold and too low can mean the air becomes dry and uncomfortable.

How does the Airthings work? ›

How Radon Detectors Work. The Airthings Home detector monitors radon by sensing what are called alpha particles. Alpha particles are emitted as by the radioactive gas radon, and the Airthings device has a sensor calibrated to detect alpha particles.

What is the acceptable air level? ›

An AQI value of 100 generally corresponds to the national air quality standard for the pollutant, which is the level EPA has set to protect public health. AQI values at or below 100 are generally thought of as satisfactory.

What is the safe limit of air quality? ›

The greater the density of pollutants in the air, the higher the Air Quality Index (AQI), a scale that runs from zero to 500. An AQI of 50 or below is considered safe, while readings above 100 are deemed unhealthy.

What is the safe ppm for air quality? ›

OSHA currently sets 5,000 parts per million (ppm) as their Permissible Exposure Limit (PEL) for occupational exposure to CO2. The American Society of Heating, Refrigeration and Air Conditioning Engineers (ASHRAE) currently recommends that CO2 levels be maintained below 1,000 ppm.

Top Articles
Latest Posts
Article information

Author: The Hon. Margery Christiansen

Last Updated:

Views: 6421

Rating: 5 / 5 (50 voted)

Reviews: 89% of readers found this page helpful

Author information

Name: The Hon. Margery Christiansen

Birthday: 2000-07-07

Address: 5050 Breitenberg Knoll, New Robert, MI 45409

Phone: +2556892639372

Job: Investor Mining Engineer

Hobby: Sketching, Cosplaying, Glassblowing, Genealogy, Crocheting, Archery, Skateboarding

Introduction: My name is The Hon. Margery Christiansen, I am a bright, adorable, precious, inexpensive, gorgeous, comfortable, happy person who loves writing and wants to share my knowledge and understanding with you.